SILICON WATERProofing COATING
WATERBASE 100% SILOXANE SILICONE
Silicone Water Repellent Coatings Building protects us from nature forces like rain, heat, cold, wind etc., The concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc.,The consequent spalling of concrete plaster, flaking off expensive paint on interior/exterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future.
Sigma Waterproofing coating
Manufactured By H.A & Sons, Sigma Water Proofing Coating a waterproofing system cover every need of Building & Construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic SBR latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterproofing compound without breaking the existing concrete screed.
- Roof Coating
- Damp Wall Coating
- Basement Walls Coating
- Upper floor washroom coating before dpc
- Terrace Coating & etc
Buildings, Roofs, Terraces and Damp walls requires waterproofing chemicals in order to protect from rain, moisture & wind.
Sigma, waterproofing repellent coating, is the best waterproofing coating brand in Pakistan. Sigma coating fills the concrete pores, micro cracks and roofs through which water seep. Sigma, composed of acrylic specially developed with highly elastic and durable silicone. It is suitable for both indoor and outdoor roof and bathrooms.
Sigma waterproof repellent coating is largely good for the environment since they are solvent free and minimal VOC level. Since they are moisture – cured and solids – based, silicone can be applied at virtually any temperature. Many customers from the construction sector deals with us. We gain the trust of the clients, work hard and make sure that we fulfill the factors described.
- Pure silicone based.
- Start resisting water just after 120 minutes of application.
- Keeps surface breathable.
- Easy to use , cost effective.
- Excellent water repellent characteristics.
- Protect surfaces from discoloration & pollution.
- Water vapour permeability uneffected ; allows concrete to breathe.
- Prevent ingress of water borne chlorides & sulphates. (No Cracks, No Shrinkage)
H.A & Sons is an organization equipped with means and methods for providing you overall basement waterproofing services in Pakistan. Whether is flooded basement, molds or mildew across the corners of the walls or simply seepage found at your basement, our experts will make sure your walls and floor are well protected from water being surfaces either from the ground up, heavy rain, or next door leaking house.
We understand the need for the perfect house as it increases its resale value as well as improve the living standard of people because no one enjoys a wet basement in their homes.
If you might be thinking how on earth the excessive water can be transfer out from your basement, which is considered to be the lowest area of your home, there are 3 steps involve for it, one is to clean your basement gutters, as it might be clogged up due to garbage or debris, secondly, make sure your downpipe is extended further down into the gutter area, which comes into the construction part of the work, and lastly, create a slope feature around your basement flooring for water to move away into the gutter opening automatically, instead using a manual wiper which takes time. Our experienced professional will make sure that our customers get the best basement waterproofing services in Pakistan.
We believe that by providing sincerity and hard work, you can excel and grow exponentially. H.A & Sons handles our customers with great care and diligence and in order to provide an all-rounder roof leakage proofing services in Pakistan. For people who are facing extreme water leakages in Punjab it is widely important to understand them without protecting your roof, you might put your walls and internal furniture into risks, as bare concrete has the tendency to absorb water into a greater content. Our state of the art chemical treatment for roof leakage proofing services in Pakistan, the tight pack molecules of the roof waterproofing services along with compound is well structured to handle roof leakage in the most adequate manner.
Roof waterproofing is among the vital steps to protect your interior to a much greater extent. For rainwater or moisture into the air, your roof might effect to the greatest. Using our industry grade Silicon Resin and Silicon Polymerized Vinyl Water Seal waterproofing techniques in Pakistan, there will be maximum protection from any unwanted water leakage treatment, and seepage treatment, our customer will observe a definitive difference against the application of roof waterproofing chemical treatment in Pakistan.
DAMP WALL SEEPGAE AND WaterProofing Services
Usually people asked with many home repair contractors, how to stop damp in the bedroom? And we have the only viable solution that not only provides a befitting response with our customer’s issue but also proved to be a reasonable one. We, H.A & Sons Construction Chemicals, understands the abomination for dampness on the wall, which absolutely ruins the perfect wall into shreds, and the aesthetics turned into dust. It is our responsibility to provide suitable solutions as dampness on wall treatment to our customers which makes sure that our customers are fully satisfied in the end, and that their wall is properly returned to its formal glory. Looking at the repercussion of dampness on the wall, you might notice some of the harsh side effects when extra water is absorbed inside your wall. Some of these consequences are patches that never seem to fade away, plaster which is completely damaged from all areas, weird smell and various ugly watermarks. As we all understand that most of the residential and homes are built over concrete walls, which has the tendency to absorb water in greater quantity, might give you a false sense of assurity that wet walls mean better cooling inside the walls. Actually, there is no connection between the water and heat, when it comes to sunlight, but that comes in the jurisdiction of heat proofing, another service offered by H.A & Sons
BATHROOM WATERPROOFING SERVICES
Mostly for the tiled bathroom, the waterproofing techniques usually involved in the cracks and openings for the tiles from where water gets entered into the floor and damages the tiles as well as store water which in result produces mold and mildew if left untreated. Our sophisticated and industry grade waterproofing chemicals surely cover up and value waterproof tile grout to fully functional in terms of preventing water from ever get resides inside the tiles in concealed form. Our technicians will undergo a rigorous and detail working that fills up all the tile grouts up to its limit, which further restrict water to find its way towards its intended route, which is usually the drainage
SIGMA SILICON WATERPROOFING SOLUTION
PRODUCT DESCRIPTION AND USES It is a transparent solution designed for use on exterior masonry surfaces providing an effective waterproof barrier.This product is basically an impregnating Primer.It does not alter surface and remains effective. It is recommended for use on new and unpainted concrete,cement, stone etc.
CHARACTERISTICS It is a Silicone Resin dispersed in a suitable solvent.
APPLICATION Can be applied by brush or spray. Apply generously flooding the surface. Apply several coats wet on wet until the substrate saturated. Do not leave long breaks between coats. Apply the
next when the substrate has absorbed the previous one and is no longer shiny (wet-on-wet application). The substrate must not have damp spots i.e. it should look dry. If application is by spray use the minimum pressure to prevent atomisation. Preferably use brush against conventional spray. Protective Masks should be worn as prolonged inhalation may cause dizziness.
THINNING Supplied ready for use. No thinning required.
DRYING TIME Once applied, it attains Surface dry in 1 hour.
SPREADING CAPACITY Depends on Surface porosity and texture but is approximately 3-5 M2 per litre.
EQUIPMENT CLEANER Use Plascon White Spirit or Mineral Turpentine.
PACK SIZES Gallon 3.64 litres, Bucket 14.56 litres
NOTE: Plascon Silicone Waterproofing Solution should not be used on fabric, canvas etc.