PRO MAX SILICONE Paint

SILICONe

Quality silicone is used by H.A and Sons. Silicone is a chemical element which is produced by nature and can be easily found in the world, especially in the sand. Silicone can be found in a form of solid crystalline like glass or sand. Silicone has various benefits, some of which include that silicone is pocket friendly, lasts long and is effective for paints.

HOW PRO MAX SOLVES PAINT PROBLEMS?

A very common problem while painting is that if you use an ordinary paint, a plastic film is used over the surface and the water is trapped in the wall. The issue of poor drainage makes water settle on the base and get sucked up by the capillary action via hairline cracks in the condition of rains or in situations of plastering or construction. Micro cracks can be observed on cement walls which allows the water to enter by capillary absorption and the pressure of the wind. The major cause of why the paints fail is the trapped water. Water is expanded into water vapors in the presence of sun heat and the water manages to make its way out of the wall, this does not only damages the paint but also causes problems like algae and fungus, chalking, blistering, Efflorescence, rising damp, peeling and discoloration.

  • Trapped water in the walls causes blistering and peeling caused by the ordinary

PRO MAX paint provides a breathable system which allows the water to easily diffuse from the surface because of the microspores present in H.A and Sons.

  • The water trapped as a result of ordinary paint can cause fungus and algae and makes way through minor cracks on the surface. PRO MAX paint provides a paint system in which water makes its way to escape making it impossible for fungus to survive. It is important to correct the surface with H.A and Sons fungus kill before you use the paint on the
  • Water remains inside the wall by the use of ordinary paint which causes Efflorescence, this causes breaks through the paint when the water evaporates and the wall is left deposited by salt. The paint system of H.A and Sons makes it possible for the water to escape before the deposits are formed.

HOW WATER MAKE ITS WAY TO THE WALLs?

Micro cracks and holes are found on the surfaces of cement walls which makes it possible for the water to gather on the base through hairline cracks in case it rains.

A plastic film is formed on the surfaces of the walls due to trapped water when an ordinary paint is used. The water makes its way out of the wall while causing damage to the paint as the result of the sun heat.

7c08b7e2-451d-46a8-88da-97096813d734

PRO MAX PAINT SPECIALTY

H.A & Sons provides a paint system which makes the surface breathable, makes it possible for the trapped water to escape as a vapor and the paint protects the wall from fungus and efflorescence.

282fd2c4-ffa9-4c1d-af36-3c08bbfbb981
ae92f91d-853d-4268-8026-e16ac5cfbacc
71f065fb-846d-4dcf-8c8d-b09403ed1223

WHY ARE PRO MAX HAVE PERFORMED GREAT WHEN IT COMES TO COATINGS?

The reason behind the record of long lasting and quality building paints, evolution in the industry of paints, Silicone introduced a breathable paint technology that eradicates the water trapped in the walls. This allows the moisture to evaporate as vapors. This makes it possible for

Pro Max paint system to solve the issues like that of Efflorescence. This paint system makes water animosity to pore structure and moreover, it also fortifies it.

H.A and Sons provide paints with a high power of hiding and covers the appearance of mineral base. We use Silicone in our paint system which enters the minor cracks and furnishes them by making water repellent layer and the thickness of the layer ranged from 1-5mm. This provides protection from water seepages in the walls particularly the ones with minor cracks also known as micro cracks and hairline cracks, as compared to Pro Max, the ordinary paints just provide a layer on the wall. Pro Max provides a primer-less silicone paint that provides a better quality and becomes and is acceptable by the wall.

Our water repellent primer makes a dry zone protection from the problems like Efflorescence, fungus and microbial attacks and also makes a water repellent layer on substrate and H.A and Sons can be applied to any surface made of cement. It is important to note that treatment should not be applied over an area already affected by fungus and algae as it would create problem for the new finishes.